Hey Mark, thanks for reaching out!
The Inno Rod Box Rooftop Fishing Rod Carrier # IN52FR is designed to help protect against the elements, and while it will do a decent job at keeping water out, it isn't designed to be watertight or weatherproof so there's still a possibility that clothes in the bottom of it could get a little wet. Since this is meant for carrying fishing rods, Inno wasn't too concerned with keeping the interior as dry as possible. From my understanding those drain holes... view full answer...
Yes, the Rhino-Rack Ski and Fishing Rod Carrier # RR572 will allow you to mount to the T-slots on your Yakima HD crossbars. It does come with this hardware as the same bolts are used to hold on the universal clamps that will slide into the t-slots.
To secure your other cargo we do have the Eye Bolts # Y01162 you can use to tie off into. view full answer...
Adam, the Inno Rod Box Rooftop Fishing Rod Carrier # IN52FR should work just fine with a truck bed ladder rack because this carrier can be used on round, square, aero, elliptical, and most factory crossbars - which is basically every type of bar out there. As long as the ladder rack does not have a spread of over 82", you're good to go. view full answer...
Great question, John!
You can definitely mount the Rhino-Rack Fishing Rod Carrier # RR574F upside down underneath your Yakima HD crossbars! I do recommend using the included T-Bolt hardware to mount them into the channels as opposed to the clamping system just for more of a snug fit, and so the clamps won't be sitting topside of the crossbars. view full answer...
You could mount the BoatBuckle Vertical Rod Hold-Down PLUS System # IMF15435 using Velcro but I'm not sure how well it will hold up. Realistically it will depend on the Velcro used and the type of carpet. I definitely wouldn't try using adhesive backed Velcro if you decide to do this. Since the strap runs all the way around the rod holder you would want to stitch the Velcro onto the strap to make sure it stays into place. You might also want to run a small bolt with a nut and washer through... view full answer...
The Treaded Rod # 37207-30525 will allow you to switch the size of your propane tanks from 20lb to 30lb. The Complete Propane Tank Holder Mounting Kit # 37230WH is for applications where you are adding dual tanks or replacing everything due to damage.
You will need a new Tank Cover in White # 290-2113 to fully cover the larger tanks. view full answer...
Go To Results